Measures 55" long and 22" wide. 1-360-816-0211, FAX: fiberglass mat For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks, This fiberglass fender is for the left rear. Handmade with three layers of 1.5 oz. Handmade with three layers of 1.5 oz. EDP coated using Electro-Deposit Primer, and the only surface preparat For 1954 1955 Chevrolet Trucks, This left front metal fender is die stamped. A highlight, referred to by GM chief designer Harley Earl as the "diamond crown speedline," was a body crease that started in the valley between the engine compartment and fender, and extended onto the front door. Handmade with three layers of 1.5 oz. Measures 55" x 28" x 28". Measures 10" wide with 30-1/2" wheel well. CC-1697218. Price=450.00Weight=4 Ship: Thus ended the use of wood in body construction. fiberglass mat resulting in a part with consiste For 1939 Chevrolet Cars, This fiberglass fender is for the left front. You can reach us at sales@horkeyswoodandparts.com or woodandparts@yahoo.com Printable Order Form Terms and Shipping Policy CMS ADMIN Here's a little information about our favorite cars. fiberglass mat resulting in a part with consisten For 1939 Chevrolet Cars, This fiberglass fender is for the right front. Handmade with three layers of 1.5 oz. * Han For 1937 1938 Chevrolet Trucks, This is a fiberglass left rear fender that's 2 inches wider than stock for your pickup. Handmade with three layers of 1.5 oz. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. The 216 was a more robust engine than its 206.8-cu.in. These fit Chevy and GMC. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars, Fender Rear (fiberglass). Handmade with three layers of 1.5 oz. Cleaning up garage, 2 front fenders off 37 38 chevy coupe, will also fit sedan. Parting out a 1937 Chevy 2 door sedan and have some coupe parts also Fenders $150 and up hoods SOLD nose SOLD coupe roof section BOTH SOLD dash boards $50 and up door top sections $50 each window moldings $60 and up Coupe steel trunk lid SOLD Coupe fiberglass trunk lid SOLD 1937 fiberglass hood SOLD 17" wire wheels and www tires (5) $500 . Handmade with three layers of 1.5 oz. . It seems that Jim had made arrangements to buy a piece for a flathead from an "old guy." * Han For 1942 1944 1945 1946 1947 1948 Chevrolet Cars, This fiberglass fender is for the right front. This makes room for fat tires or wheels with more offset. 1-360-816-0211, FAX: He asked Jim, "What would you do with that car?" fiberglass mat resulting in a part with consist For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, This is a fiberglass right rear fender that's 2-1/2 inch wider than stock for your pickup. Handmade with three layers of 1.5 oz. Measures 55" x 28" x 28". Reproduction of stock part. Also includes the rubber seal. This is a well done street rod that has about 9,000 miles on the restoration. For your convenience we have 24/7 answering service and toll free number, - 1933-54 Dodge & Plymouth Car Truck Repair Panels, - Fiberglass Grill Shells and Aluminum Inserts, 1933 PlymouthCar 1933-351st Ser. This left front metal fender that is die stamped. For 1949 1950 Chevrolet Cars, These polished stainless steel fender skirt mouldings are also known as 'Bloomers' Fender Skirt Trim. Ad id: 2906175067388229. Price: $400.00. Handmade with three layers of 1.5 oz. Add to Cart. E-Mail Sales. fiberglass mat resulting in a part with consistent thickn For 1939 Chevrolet Trucks, This fiberglass fender is for the right rear. fiberglass mat resulting in a part with consistent thickness and strength throughout. 1937 -1939 Chevrolet Flatback Sedan: Although Chevrolet did make this model for all three years in 2dr & 4dr Sedans, the production of these bodies was too low for us to manufacture an EMS Tailpan for. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks, This is a die stamped steel left rear fender for a pickup truck. Handmade with three layers of 1.5 oz. Country/Region of Manufacture: United States. portland auto parts "1930|1931|1932|1933|1934|1935|1936|1937|1938|1939" - craigslist Will not fit COE. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars, This fender brace is for the rear and made for 2 inch widened fenders. Left, 2in. Wheel well measures 17-1/2" x 33-3/4". . 1940-1946 Fender 1/2-ton and 3/4-ton Pick-Up Rear Right Fiberglass Chevrolet and GMC Pickup Truck . $5,000 Dealership CC-1660210 1939 Chevrolet Coupe 1939 Chevrolet Deluxe Coupe. * Hand For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, This fiberglass fender is for the right rear. It fits 1954 and 1955 (1st series). We draw upon decades Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. For 1939 Chevrolet Cars, This fiberglass fender is for the left rear and is 2 inches wider than stock. Details. $624.75. Handmade with three layers of 1.5 oz. All commercial Cabs (exc. These fit 2 doors. All commercial Cabs (exc. This fiberglass fender is for the left rear. Easy Install For All Cars and Trucks, These are a pair illuminated fender guides that clamps to the wheel well of front fenders they are chrome plated with milky colored top and a clear lens, stainless fin 15.5'' For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks, These fender washers are made of machined aluminum with a brushed finish. * Hand For 1940 Chevrolet Cars, This fiberglass fender is for the right rear. Handmade with three layers of 1.5 oz. Restored 1937 chevy 2 door coupe with no rust, steel body, fiberglass fenders, excellent paint with no flaws. Steel bodied, has fiberglass fenders and is painted Bright Yellow. fiberglass mat resulting in a part with consistent thickness and strength throughout. fiberglass mat resulting in a part with consis For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, This is a fiberglass left rear fender for your Panel or Suburban. View Item Details. fiberglass mat resulting in a part with consistent thickne For 1940 Chevrolet Cars, This fiberglass fender is for the left front. 1937-1938 Fender Braces Rear Chevrolet and GMC Pickup Truck . This item is oversized, extra shipping charges will apply. Will not fit COE. 1939 Chevrolet left front fender grill splash guard. Handmade with three layers of 1.5 oz. 250.00 for left fender, 175.00 for right fender.or both for 400.00. Handmade with three layers of 1.5 oz. See Superior Glass Works section for fiberglass parts for these models Click here to see a list: 1942-48. * Han For 1940 Chevrolet Cars, This is a fiberglass rear fender is for the left side of your Panel or Suburban. We thought they were all gone long ago. This car is dead straight. EDP coated using Electro-Deposit Primer, and the only surface preparat For 1954 1955 Chevrolet Trucks, This left front metal fender is die stamped. Superior quality. Handmade with three layers of 1.5 oz. Includes left and right fronts. For 1940 Chevrolet Cars, This is a fiberglass rear fender for the left side. Price=800.00 a pairWeight=12 each Ship: Flat Pin On Side Pieces sold seperate. Brand: Metro. This is an amazing one of a kind pickup and is equippe . Again in 38you could order a Master or Deluxe Coupe with an optional pickup be that fit into the trunk area. * Ha For 1937 1938 Chevrolet Trucks, This fiberglass fender is for the left front and a reproduction of a stock part. Truck & Car Enthusiasts . Handmade with three layers of 1.5 oz. wider Note from manufacturer: Some customers have experienced fitment challenges with these widened fenders, but some say they fit great. Dealership. (Note that one of the axles was an inch wider than the other. Manufacturer or vendor parts for 1937 Chevrolet and 1938 Chevrolet. fiberglass mat resulting in a part with consistent thickness and strength throughout. EDP coated using Electro-Deposit Primer, and the only surface preparati For 1954 1955 Chevrolet Trucks, This right front metal fender that is die stamped. 1937-1938. For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks, This fiberglass fender is for the left front. wider Note from manufacturer: Some customers have experienced fitment challenges with these widened fenders, but some say they fit great. This makes room for fat tires or wheels with more offset. This item is oversized, extra shipping charges will apply. Handmade with three layers of 1.5 oz. The front fenders were the same and the 1938 rear fenders were about 3/4" wider. Inside, the seats were two inches wider and an improved steering was installed. Handmade with three layers of 1.5 oz. Handmade with three layers of 1.5 oz. Pro Front End. n (419) 499-2705. m 2512 Higbee Road, Monroeville, OH 44847. f. fiberglass mat resulting in a part with consistent thickness and strength throughout. While it sold reasonably well at 8,935, it was only available in the Master Deluxe line and perhaps The kit comes with mounting hardware. (fits 1/2 ton, 3/4 ton and 1 ton). * Hand For 1939 Chevrolet Cars, This fiberglass fender is for the left rear and is 2 inches wider than stock. All commercial Cabs (exc. For 1939 Chevrolet Cars, This fiberglass fender is for the left rear and is 2 inches wider than stock. Handmade with three layers of 1.5 oz. (Except 1 ton) Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. Reproduction of stock part. fibergl For 1939 1940 Chevrolet Trucks, This fiberglass fender is for the right front and a reproduction of a stock part. fiberglass mat resulting in a part with consistent thickness and strength throughout. fiberglass mat resulting in a part with consistent thickness and strength throughout. Chevy auto fenders for 1937-1972 vintage Chevy car models. Handmade with three layers of 1.5 oz. These fit Chevy and GMC. This makes room for fat tires or wheels with more offset. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consisten For 1942 1944 1945 1946 1947 1948 Chevrolet Cars, Fender Front Extension Right, fiberglass NOTE: This item ships direct from manufacturer. Handmade with For 1937 1938 1939 1940 Chevrolet Trucks, Your single source street rod parts provider, Telephone: fiberglass mat resulting in a part with consistent thickness and strength throughout. A rare option for Chevy coupes from about 36 to 41 was called a Coupe Pickup. Handmade with three layers of 1.5 oz. Comes with a weld through primer coating. * Han For 1939 Chevrolet Cars, This fiberglass fender is for the left rear and is 2 inches wider than stock. 1937-38 Chevy Pickup Fiberglass Rear Fenders made by Speedway Motors, for as low as $234.99. 1939 Chevrolet Coupe. f For 1937 1938 Chevrolet Cars, This fiberglass fender is for the right rear and is 2 inches wider than stock. Search. 1937 Chevrolet Coupe Streetrod for sale in North Attleboro Massachusetts. Racing Bodies & Parts. * Hand For 1937 1938 Chevrolet Trucks, This fiberglass fender is for the right rear. No 1937 or 1938 Coupes came with rear seats, however a very small number were built with rumble seats, very rare! Order online or call our expert Street Rod Headquarters automotive staff to assist you in placing your order. . Handmade with three layers of 1.5 oz. This makes room for fat tires or wheels with more offset. Manufacturer Part Number: RB1902W/OS. * Ha For 1942 1944 1945 1946 1947 1948 Chevrolet Cars, This fiberglass fender is for the left front. * Ha For 1937 1938 Chevrolet Trucks, This fiberglass fender is for the left front and a reproduction of a stock part. f For 1939 Chevrolet Cars, This fiberglass fender is for the right rear. EDP coated using Electro-Deposit Primer, and the only surface preparati For 1954 1955 Chevrolet Trucks, This right front metal fender that is die stamped. 1938 37 Chevy coupe rear fenders Gasser Rat Rod Hot Rod. * Hand For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, This fiberglass fender is for the right rear. (Except 1ton) Handmade with three layers of 1.5 oz. 1937 CAR FRNT FENDER INNER APRON PANELS $399.99 -30% Add to cart RH Stepside Rear Fender (Clearance); 1953-79 Pickup $375.00 $259.99 Add to cart 1942-48 CAR TAIL LIGHT HOUSINGS (SMOOTH) $197.99 Add to cart 1942-48 CAR TAIL LIGHT HOUSINGS $197.99 Sold out Unavailable 1942-48 CAR REAR FENDER STONE GUARDS SS $175.00 Add to cart 1934-36 Chevy Truck Tapered Fiberglass Running Boards Part Number: BB34CT04TS. Handmade with three layers of 1.5 oz. Handmade with three layers of 1.5 oz. fiberglass mat resulting in a part with consistent thickness and strength throughout. (excluding 1 ton). Please call for ratesThis fiberglass front fender e For 1942 1944 1945 1946 1947 1948 Chevrolet Cars, This fiberglass fender is for the left rear. 1953 - 1954 Car. Handmade with three layers of 1.5 oz. Chevrolet Trucks Fiberglass Fenders. For 1937 1938 Chevrolet Cars, This fiberglass fender is for the left rear. * Han. No wrecks on this body! fiberglass mat resulting in a part with consistent thickness and strength throughout. This is precision die-stamped from 18 gauge steel. * Han For 1937 1938 Chevrolet Cars, This fiberglass fender is for the right rear and is 2 inches wider than stock. fiberglass mat resulting in a part with consistent thickness and strength throughout. Measures 12" from bedside to center of wheel opening. The seventh stylewas called a Coupe Pickup. posts. fiberglass mat resulting in a part with consistent For 1941 Chevrolet Cars, This fiberglass inner fender panel fits on the in side of the fender on the right side. For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks, This left front metal fender that is die stamped. fiberglass mat resulting in a part with consistent thickness and strength throughout. EDP coated using Electro-Deposit Primer, and the only surface preparati For 1954 1955 Chevrolet Trucks, This right front metal fender that is die stamped. Check out the alignment of the hood, fenders and doors. All 1937 coupes are exactly the same, and will exchange with 1938 coupes as well with some very minor differences. It seems that every magazine, auction and car show has a recent barn find with accompanying documentation. fiberglass mat resulting in a part with consistent thickness and strength throughout. fiberglass mat resulting in a part with consistent thickness and strength throughout. fiberglass mat resulting in a part with consiste For 1937 1938 Chevrolet Trucks, This fiberglass fender is for the left rear. Handmade with three layers of 1.5 oz. 1937-1938 Large Chevrolet Truck Front Steel Fenders Price Reduced. fiberglass mat resulting in a part with consistent thickness and strength throughout For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars, Fender Rear (fiberglass). fiberglass mat resulting in a part with consistent thickness and streng For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, This is a fiberglass right rear fender for your Panel or Suburban. fiberglass mat resulting in a part with consistent thickness and strength throughout. The panel fit is very good with the hood and trunk being steel. All 1937 and 1938 had the Speedline. See Stock Status. 1939 Chevy coupe gasser street rod rat rod muscle car hot rod - $4500 (azle tx) No calls before 12noon TX time, don't need help selling this carI have the front fenders good condition and hood and new fiberglass rear fenders, no running boardsCoupe set up for small or big block Chevy, mustang II front end, has trans mount, 4 link narrowed ford rear end, boxed fr . f For 1937 1938 Chevrolet Cars, This fiberglass fender is for the right rear and is 2 inches wider than stock. Dealership. Handmade with three layers of 1.5 oz. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, Fender Brace Rear, polished stainless steel, fits 1/2 Ton pickups. This is precision die-stamped from 18 gauge steel. fiberglass mat resulting in a part with consisten For 1937 1938 Chevrolet Trucks, This is a fiberglass right rear fender that's 2 inches wider than stock for your pickup. fiberg For 1939 1940 Chevrolet Trucks, This fiberglass fender is for the left front and a reproduction of a stock part. (fits 1/2 ton, 3/4 ton and 1 ton). Cars. Order online or call our expert Street Rod Headquarters automotive staff to assist you in placing your order. This grille is made of cut polished stainless steel for your street rod and includes the left and right s For 1939 Chevrolet Cars, This fiberglass front fender extension is located on the upper left side of the fender. Location: North Attleboro, MA 2760 Exterior: Yellow Transmission: Automatic Seller: FossilCars $29,500.00 CALL(800)220-9683 Website www.wantedoldmotorcycles.com Phone Center Hours Handmade with three layers of For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks, This fiberglass fender is for the right rear. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks, This is a die stamped steel left rear fender for a pickup truck. They were also fitted with a 4.22:1 "performance" axle, while Master models employed a 3.73:1 "economy" ratio. The last pictures show that Jim has some work to do, but what a labor of love this will be! Call 800.979.0122, 7am-10pm, everyday. fiberglass mat resulting in a part with consistent thickn For 1939 Chevrolet Trucks, This fiberglass fender is for the right rear. This makes room for fat tires or wheels with more offset. fiberglass mat resulting in a part with consistent thickness and strength throughout. Look at the pictures as the 37 Chevy Master coupe sees daylight for the first time in 50 years! EDP coated using Electro-Deposit Primer, and the only surface preparat For 1954 1955 Chevrolet Trucks, This left front metal fender is die stamped. Please call for ratesThis fiberglass front fender e For 1942 1944 1945 1946 1947 1948 Chevrolet Cars, Fiberglass Inner Fender Panels for 1939 cars. The 1937 Chevrolet 4-door Sedan suffered from the same ailment of the Coach with less rear legroom. All commercial Cabs (exc. Pinstriping, aluminum alloy wheels -- removable hood sides, shaved trunk and door handles . Handmade with three layers of 1.5 oz. Ford 1937 Grille - Hood - Fenders - Running Boards: Passenger Cars: Ford: 1938 Standard, 1938 Deluxe, 1939 Standard Grille - Hood - Fenders - Running Boards: Passenger Cars : Ford 1938-39 Grille . Includes seal. Handmade with three layers of 1.5 oz. Steel bodied, has fiberglass fenders and is painted Bright Yellow. It fits pickups, not utility or COE. (excluding 1 ton). The body is all steel with a nicely done chopped top and a fiberglass till front end and fiberglass rear fenders. Hot Rod Rat Rod, here is a very clean body 1938 Chevy Sedan, has a new fiberglass tilt forward (37) front end, new speedway straight axle, 327 CID small block with cam, tunnel ram 2X 4 set up, fender well headers, 4 speed tranny, new brakes disc front shoe rear, new wheels and tires, 8 3/4 rear end street gear . 00-02 Neon. KF, AN, BN, DS). For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars, Fender Rear (fiberglass). Outlaw manufactures 7 different fiberglass body/chassis (frame) styles which are 1932 Ford coupe, 1933-34 Ford coupe/roadster, 1934-35 Chevy standard coupe, 1934 Chevy standard sedan/sedan delivery and our most famous 1940-41 Willys. These Harwood fiberglass front-ends will take some serious weight off your race car. For 1939 Chevrolet Cars, This brace is for the rear fender on cars with 2 inch widened fenders. Measures 10" wide with 30-1/2" wheel well. 1937 Fits Ford Left Rear Fender Coupe & Convertible, Fiberglass. * Han For 1937 1938 Chevrolet Trucks, This is a fiberglass left rear fender that's 2 inches wider than stock for your pickup. Handmade with three layers of 1.5 oz. Handmade with three layers of 1.5 oz. Chevrolet Chevy Car Front Floor Pan Floorboard for Stock Firewall 1937-39 DSM, GM Chevy Pontiac Hardware Bolts 5/16"-18 With Correct Threaded Point 10pcs MN, GM NOSR Chevy Buick Oldsmobile Pontiac Wheel Well Opening Molding Trim Screws KF, GM Body Fender Dash Factory Correct #10-24 Screw Bolt U Clip Panel J Nut 10pcs L. wider Note from manufacturer: Some customers have experienced fitment challenges with these widened fenders, but some say they fit great. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars, This fiberglass fender is for the left rear. wider Note from manufacturer: Some customers have experienced fitment challenges with these widened fenders, but some say they fit great. fiberglass mat resulting in a part with consistent thickness an For 1937 1938 Chevrolet Cars, This is a inner fiberglass fender panel for the left front Handmade with three layers of 1.5 oz. It's hard to get our old cars to line up like that. f For 1940 Chevrolet Cars, This fiberglass fender is for the right rear and is 2 inches wider than stock. fiberglass mat resulting in a part For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks, This fiberglass fender is for the left rear. Handmade with three layers of 1.5 oz. Will not fit COE. 1934-35 Chevy 3-Win Coupe - ScottRods. What can I say? Price=650.00 Weight=13 Ship: Lift Off Trunk. Reproduction of original 39-40. Web Development and Hosting by Record Keeper Systems, Front Fender Extension (Fiberglass) -Chevy Car. Look at that black lacquer paint. * Ha For 1942 1944 1945 1946 1947 1948 Chevrolet Cars, This fiberglass fender is for the left front. * Han For 1939 Chevrolet Cars, This fiberglass fender is for the left rear and is 2 inches wider than stock. * Han For 1939 Chevrolet Cars, This fiberglass fender is for the left rear and is 2 inches wider than stock. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks, This right front metal fender is die stamped. Handmade with three layers of 1.5 oz. Handmade with three layers of 1.5 oz. Details. Copyright 2004-2023 | Street Rod Headquarters Inc. fiberglass mat For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks, This fiberglass fender is for the right front and a reproduction of a stock part. This item is oversized, extra shipping charges will apply. Not to be left out, we present a beautiful 1937 Chevrolet as found near Enid, OK. It fits pickups, not utility or COE. Here at Superior Glass Works, we specialize in early Chevy car and truck chassis from 1931-1948 cars and 1931-1954 trucks. Measures 55" x 28" x 28". MADE IN USA! Odometer Reading: 10,335. We want the 37/38 community to know about your products. fiberglass mat resulting in a part with consistent thickness and stren For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, This fiberglass front fender extension is located on the upper left side of the fender. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, This is a die stamped steel right rear fender for a pickup truck. Ship: Front Fenders. Handmade with three layers of 1.5 oz. It was a regular Master or Deluxe Coupe with an optional pickup be that fit into the trunk area. While the truck fenders may look similar, they will not fit the car. Handmade with three layers of 1.5 oz. Includes the rubber seal. Measures 55" x 28" x 28". Handmade with three layers of 1.5 oz. Hood. Blue Flame six--the only engine offered in the company's trucks that year. The 1937 Chevy was touted as "The complete car, completely new" in ads. Handmade with three layers of 1.5 oz. Price=1200.00 a pair Weight=15 each Ship: Rear Fenders. Handmade with three layers of 1.5 oz. $625.00. 1937-39 Chevrolet Sedan Door Bottoms. 1937 1938 Chevrolet 1 Ton Panel Commercial Truck Rear Fender Nos 10-007. Call 800-731-0067 for a custom quote Superior Glass Works 31816 Ona Way Molalla, OR 97038 info@superiorglassworks.com Phone: 503-829-9634 The car had belonged to the old guy's mother-in-law. (excluding 1 ton). Price=1200.00 a pairWeight=15 each Ship: Rear Fenders. f For 1939 Chevrolet Cars, This fiberglass fender is for the right rear. For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks, This is the front passengers side fender repair panel that's located on lower backside of the fender. Printed catalog available. Handmade with three layers of 1.5 oz. Note: Th For 1940 1941 1942 1944 1945 1946 Trucks, This is a front drivers side fender repair panel that's located on lower backside of the fender. Handmade with three layers of 1.5 oz. Description. Check out the alignment of the hood, fenders and doors. fiberglass mat resulting in a part with consistent thickness and strength throughout. Add to cart. fiberglass mat resulting in a part with consistent thickness and strength throughout. fiberglass mat resulting in a part with consistent For 1942 1944 1945 1946 1947 1948 Chevrolet Cars, This fiberglass inner fender panel fits on the in side of the fender on the right side. We invite you to share it with the 37/38 family. Will work on 1937-38 models, but is not correct. fiberglass mat resulting in a part with consistent thickness and strength throughout. (fits 1/2 ton, 3/4 ton and 1 ton). fiberglass mat resulting in a part with consistent thickness and strength throughout. Good Stuff. Measures 55" long and 22" wide. The fender bra For 1940 1941 1942 1944 1945 1946 Trucks, This is a die stamped steel left rear fender for a pickup truck. 95-02 Sunfire. Handmade with three layers of 1.5 oz. It looks like a gentle cut & buff is all that it will require to be good as new. 1937-38 Chevy Pickup Fiberglass Rear Fenders (6) Material Type: Fiberglass $234.99 /each $254.00 Add to Cart Speedway Motors | #9003840 1940-1941 Ford Pickup Rear Fenders (7) Material Type: Fiberglass $219.99 /each Add to Cart Speedway Motors | #9004030 1940-41 Ford Pickup Front Fenders (2) Material Type: Fiberglass as low as $263.99 /each It fits pickups, not utility or COE. They are made of heavy-duty fiberglass and feature a black gelcoat finish. * Hand For 1939 Chevrolet Cars, This fiberglass fender is for the left rear and is 2 inches wider than stock. race car. The kit comes with mounting hardware. This makes room for fat tires or wheels with more offset. .Price=250.00 a pair Weight=4 Ship: Smooth Running Measures 55" x 28" x 28". A superb product that includes the rubber seals. Universal Parts. Handmade with three layers of 1.5 oz. Postit here sothe 37/38 family will see it. 1937 Chevy Pickup Fiberglass Street Rod Chassis Rod and Race Parts Follow our latest projects. fiberglass mat resulting in a part with consistent thickness and strength throughout. * For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks, This is a fiberglass left rear fender that's 2 inches wider than stock for your pickup. The paint is very . Measures 55" long and 22" wide. fiberglass mat resulting in a part with consistent thickness and strength throughout. 1934 Dodge Car Fiberglass Front Fender with Scallops LH (15-1253L) 63" Long. We also build Ford car & truck chassis from Model T - 1940 and can rebuild or customize your existing or uncommon chassis.Additional Services. Handmade with three layers of 1.5 oz. It had a new grille that featured horizontally arranged chrome bars. W/Streamlined grill. This makes room for fat tires or wheels with more offset. These work great to cushion fasteners and protect paint. We will also post a few significant parts at your editor's discretion. Beautiful 1937 chevrolet coupe customized to perfection. They'll seal small openings and prevent squeaks. The new bodies were wider and roomier than before and were made entirely of steel. fiberglass mat resulting in a part with consistent thickness and strength throughout. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars, Fender Rear (fiberglass). 1-800-888-CHEVS (2438) Will not fit COE. $35,995. fiberglass mat resulting in a part For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks, This is a fiberglass right rear fender that's 2 inches wider than stock for your pickup. 2",Price=5800.00 Weight=43 Ship: Complete Body Stratus. Fiberglass Fenders: Wescott's builds quality fiberglass fenders for Fords 1926-48. Price: 430.0 Normal shipping $160-$260.00 depending on your location and a commercial address Resident . Measures 55" long and 22" wide. Price=495.00 a pair Weight=13 Ship: Roof Clip(Body).Chopped This item is oversized, extra shipping charges will apply. This is precision die-stamped from 18 gauge steel. * Han For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks, This is a fiberglass left rear fender that's 2-1/2 inch wider than stock for your pickup.
